answersLogoWhite

0

Search results

No. There is no way to record in stereo using the mic input on a phone. To do this, you would need to use an interface and plug into the multipin connector

1 answer


Interface Media Group was created in 1977.

1 answer


The Digi 002, which is a Pro Tools recording interface made by Digidesign, has four mic preamps.

1 answer



Still have questions?
magnify glass
imp




Yes it is just a preamp you need an audio interface that will connect the preamp to the audio interface into the computer and obviously a Mic in front of it

1 answer




An mpp-1150 interface is used with the Atari computer serial interface that connects to a printer 36-pin Centronics connector.

1 answer


EIDE cable uses a 40-pin connector at the end of the cable to interface with the drive.

1 answer


To wire a 4-pin CB mic, match the colors of the wires to the corresponding pins on the mic connector. Typically, red is for transmit, white is for receive, blue is for modulation, and black is for ground. Consult the mic's manual or a wiring diagram for your specific mic model to ensure correct connectivity.

1 answer



If you mean a standard 10/100 type Network Interface Card (nic), then you connect it with a CAT5 or CAT6 cable, the connector on the end is known as an RJ45.

3 answers



Media means type of data transfer, cable and connector but cable and connector can also be called medium. and coaxial is a type of cable which is mainly used for ethernet

1 answer


Media means type of data transfer, cable and connector but cable and connector can also be called medium. and coaxial is a type of cable which is mainly used for ethernet

1 answer


You have to use an USB audio interface because the new MacMini (2011 and later) doesn't have a mic input. The only sound input is a LineIn. The cheapest solution can be some USB-headset.

1 answer


A wave that separates two different media is called a boundary or interface wave. Examples include reflection and refraction at the interface between two materials.

1 answer


Plug the USB connector into the USB Port... then control the menu with the normal Controller

1 answer


DVD drive with an IDE interface

1 answer


Digital visual interface (DVI) is used for high-resolution digital displays. A DVI connector can be used to connect your computer to your TV.

1 answer


An electrical connector is a device used for joining electrical circuits. These connectors can be temporary or permanent. An electrical connector is also called a physical interface.

1 answer


A physical port, as opposed to a virtual or logical port is an interface on a computer into which you can insert a connector for a device.

1 answer


Auxiliary sound refers to auxiliary interface connector where one can connect external sound devices.

1 answer


DVD ROM drives can be connected using a USB connector/interface or installed in the computer using a Serial ATA connector (or if you computer is old an ATA connector if you can find an ATA DVD drive).

1 answer


First you need an interface between two media, second you need that interface to be at an angle to the light path.

1 answer


for mbc first to perform mic .either micro or macro dilution broth method then from mic tude take loop full and streak on to media then observe for growth

1 answer


It is called a boundary wave or an interface wave. These waves propagate along the interface between two different media and can exhibit unique properties based on the properties of the two media they border.

2 answers


this is connector chip used for asynchronous serial interface and its task is to make voltage level operative for next connected device.it is usually used in pc and microcontroller interface

1 answer



NIC (Network Interface Card)

3 answers


Mplayer is generally a command-line media player but will bring up a graphical interface when invoked to play a media file.

1 answer


Using the sound card mixer, record from the wave output instead of the mic or mine inputs.

1 answer


The mic is right next to the headphone jack on the top left of the iPad.

5 answers


All MP3 Players can interface with iTunes with some work, however only iPods are designed to interface with the software out of box.

1 answer


A DB9 connector on your computer has one specific function, interface with one serial device.

1 answer


The most highly rated media software is the XBMC Media Center which plays media files on computer systems such as Windows and MAC. It was originally meant to perform as the interface to XBOX.

1 answer


When light falls perpendicular to an interface of two media, it continues to travel in a straight line without changing direction. There is no change in the speed or wavelength of the light. This phenomenon is known as normal incidence.

1 answer


The media connector between the NIC and the UTP cable is a RJ-45

Internetworking with Cisco and Microsoft pg. 229

1 answer


If in both the media light has the same speed

1 answer


Reflection happens only at the interface between two media, and two media with the same index of refraction act as if they were a single medium. Thus, at the interface between media with the same index of refraction, there is no reflection, and the ray keeps going straight. Continuing this line of thought, it is not surprising that we observe very little reflection at an interface between media with similar indices of refraction.

2 answers


To attach a microphone to a Mac Mini requires a connector such as the iMic (See links below) or a USB mic that will plug in directly.

1 answer


4 pin and 6 pin. 6 pin provides power for the external device.

1 answer


SCSI Harddrive:

80-pin Connector
The SCA interface was designed to provide a standard connection for systems using hot swappable drives. SCA interface drives connect to a SCSI backplane that provides power, configuration settings such as SCSI ID, and termination of the SCSI bus.

1 answer


yes adjust the jumper at the back of the drive. it's a white block. it between the interface connector and power connector.

you also want to set it aswell in the bios.

1 answer


Yes, it will upconvert DVD media to 720p/1080i .

1 answer


In Pro Tools 9 or 10, you can use the MobilePre as an audio interface. You must select it as the input in the hardware options. The mic must be connected to one of the XLR microphone inputs on the MobilePre, the phantom power turned on if it is a condenser mic, and an audio track armed with the first or second input selected (depending upon where you plugged in the mic).

1 answer